Take your mobile entertainment on the road with the new RAM Torque handlebar and rail mounting
base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4" - 1" in diameter with
the dynamic X-Grip for phones. Sizing inserts are included to provide a snug fit and offer
additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in
high vibration environments. This low-profile mount is the perfect way to secure your personal
electronics and small accessories in any high-vibration environment. The included X-Grip cradle has
a clean and clever four leg design that sports great holding power without hiding your phone behind
foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a
perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of
today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device
tether recommended for outdoor applications. The cradle is compatible with handheld devices that
will fit the dimensions listed below. It is important to verify the dimensions of your handheld
device with a case/sleeve/skin when determining the overall size.
HARDWARE INCLUDED
(1) Optional Tether
(1) Glue Tube for Rubber Caps
(2) #10-24 x 1" Socket Head Cap Screws
(2) #10-24 Nylock Nuts
(2) .75" Composite Bushings
(2) .9" Composite Bushings
(1) 88.9mm Rubber Strip
(1) 5/32" Hex Key Wrench
HOLDER DIMENSIONS
Width Range: 1.875" - 3.25"
Depth Range: .875" max
CLAMP RANGE
.75" - 1" diameter
SOCKET-TO-SOCKET LENGTH
3"
BALL/SOCKET SIZE
B Size (1")
WEIGHT CAPACITY
2 lbs
MATERIALS
Marine-grade aluminum
High strength composite
Stainless steel
PACKAGING TYPE
Poly Bag
ADDITIONAL INFORMATION
WEIGHT
0.79 lbs.
base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4" - 1" in diameter with
the dynamic X-Grip for phones. Sizing inserts are included to provide a snug fit and offer
additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in
high vibration environments. This low-profile mount is the perfect way to secure your personal
electronics and small accessories in any high-vibration environment. The included X-Grip cradle has
a clean and clever four leg design that sports great holding power without hiding your phone behind
foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a
perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of
today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device
tether recommended for outdoor applications. The cradle is compatible with handheld devices that
will fit the dimensions listed below. It is important to verify the dimensions of your handheld
device with a case/sleeve/skin when determining the overall size.
HARDWARE INCLUDED
(1) Optional Tether
(1) Glue Tube for Rubber Caps
(2) #10-24 x 1" Socket Head Cap Screws
(2) #10-24 Nylock Nuts
(2) .75" Composite Bushings
(2) .9" Composite Bushings
(1) 88.9mm Rubber Strip
(1) 5/32" Hex Key Wrench
HOLDER DIMENSIONS
Width Range: 1.875" - 3.25"
Depth Range: .875" max
CLAMP RANGE
.75" - 1" diameter
SOCKET-TO-SOCKET LENGTH
3"
BALL/SOCKET SIZE
B Size (1")
WEIGHT CAPACITY
2 lbs
MATERIALS
Marine-grade aluminum
High strength composite
Stainless steel
PACKAGING TYPE
Poly Bag
ADDITIONAL INFORMATION
WEIGHT
0.79 lbs.
Rail Mount Dimensions:
- Accommodates rails 3/4" to 1" in diameter
Purchase Includes:
- (QTY. 1) Optional Tether Included
Cradle Dimensions:
- Minimum Width = 1.875" (Minimum Height = 4.25")
- Maximum Width = 3.25" (Minimum Height = 2.25")
- Depth = 0.875"
- Material:Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components &
High Strength Composite - Ball Size:B Size 1" Rubber Ball
- Note:The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
- Weight:0.79 lbs.
RAM-B-201U
RAM-B-408-75-1U
RAM-HOL-UN7BU