RAM-238-WCT-2-MS2_RAM Wheelchair Arm Mount for Xbox Ada

Attach this wheelchair arm track mount directly to your wheelchair’s arm track system to enable use
of the Microsoft Xbox Adaptive Controller. The controller attaches to the included RAM diamond base
adapter with 1.5” ball and double socket swivel arm, allowing for a 90-degree tilt so you can angle
the adaptive controller exactly where you need it. On the opposite end of the arm, another diamond
base adapter with 1.5” ball attaches to most wheelchair arm track systems including Invacare,
Permobil, and Quickie, as well as any other universal mounting point with the included universal
hardware pack. When you’re not using the Xbox Adaptive Controller, swap it out with any compatible
RAM 1.5” ball base, such as the RAM X-Grip cradle for phones and tablets. This inclusive gaming
kit includes hardware and a hex wrench for mounting an Xbox Adaptive Controller.

HARDWARE INCLUDED
(2) #10-24 x 1/2" Machine Screws
(1) 5/32" Hex Key Wrench
(2) #10-32 T-Nuts
(2) #10-32 Flat Weld Nuts
(2) #10-32 x 1/2" Machine Screws
(2) M4 x 12mm Machine Screws
(2)M4 x 20mm Machine Screws
(2) M4 Stainless Steel Washers
(2) M4 Nylock Nuts

T-BOLT DIMENSIONS
Large: .48" x .95"
Small: .375" x .593"

SOCKET-TO-SOCKET LENGTH
7.16"

HOLE PATTERN
2-Hole AMPS 1.912" (both plates)

BALL/SOCKET SIZE
C Size (1.5")

WEIGHT CAPACITY
4 lbs

MATERIALS
Marine-grade aluminum
High strength composite

PACKAGING TYPE
Retail Bag

WEIGHT
1.05 lbs.