|
|
|
|
Leveraging the USB 2.0 OTG mode, the RAM-GDS-CHARGE-RS232U adapter combines two functions that are critical to enabling ELD and telematics solutions with commercially available tablet form factors. The ability to charge a host device �� that supports the OTG embedded (FTDI and Prolific) drivers while communicating to RS232 devices � also allows a tablet or phone to become enabled for applications that require charging and peripherals at the same time. This adapter allows the tablet to be in both host mode and accept a charge of up to 1.67A (at ~5V), eliminating the need for a separate charger. The internal charger supports USB 2.0 BC1.2 mode as a DCP mode charger to the host device. The adapter supports attached RS232 (serial) devices to communicate information such as engine data, streaming location data, driver ID information, and much more. This charger has a Molex connector on it and includes a Molex to serial cable.
PACKAGING TYPE Poly Bag
INPUT RANGE 8V - 40V DC
OUTPUT VOLTAGE 5VDC
OUTPUT CURRENT 2.5A max
OUTPUT CONNECTOR TYPE Male mUSB 2.0 .5 Meter Molex Micro-Fit 3.0 Female to RS232 DB9 pin serial cable - VCC, GND, RTS, CTS, TXD, RXD Signals
TRANSFER SPEED Up to 115200bps
INPUT CABLE LENGTH 1.2 Meters
OUTPUT CABLE LENGTH 1 Meter
OPERATING TEMPERATURE -30�C to +70�C
STORAGE TEMPERATURE -40�C to +85�C
PORTS Molex MIcro-Fit 3.0 3x2 6 Position Male Connector (on housing)
COMPLIANCE Over Voltage Protection (OVP), Integrated Short Circuit Proetection (SCP)
CERTIFICATIONS FCC, Industry Canada, CE, RCM, WEEE, e-Mark, and RoHS Compliant USB 2.0 BC 1.2 DCP Support FTDI WHQL or Android Driver Compatible FTDI USB to RS232 FT232RL Converter ZT213LEEA Serial Driver
WARRANTY STATUS 3 year warranty
ADDITIONAL INFORMATION Tablet Compatibility�: Samsung Galaxy Tab A (8.0�, 9.7�, 10.1?) Samsung Galaxy Tab E (8.0�)� Samsung Galaxy Tab E (9.6�) Samsung Galaxy Tab S2 (8.0?, 9.7?) Samsung Galaxy Tab 4 (8.0?, 10.1?) Samsung Galaxy Tab S (8.4?, 10.5?) �This list is not complete, yet contains tablets that have been tested. There might be changes or previous / subsequent modifications made by the OEM to the listed product that might reduce or eliminate compatibility without notice. �Supports up to the SM-T377W
- Input Range: 8V - 40V DC
- Output Voltage: 5VDC
- Output Current: 2.5A max
- Output Connector Types: Male Micro-USB
- Input Cable Length: 1.2 Meters
- Output Cable Length: 1 Meter
- Includes Molex Micro-Fit 3.0 3x2 6 Position Male connector on housing
- .5 meter Molex Micro-Fit 3.0 Female to RS232 DB9pin serial cable- VCC,GND, RTS, CTS, TXD, RXD Signals
- Operating Temperature Range: -30�C to +70�C
- Storage Temperature Range: -40�C to +85�C
- Overvoltage Protection (OVP)
- Integrated Short Circuit Protection (SCP)
- FCC, Industry Canada, CE, RCM, WEEE, and ROHS Compliant
- USB 2.0 BC 1.2 DCP Support
- FTDI WHQL or Android Driver Compatible
- Max Speed 115200bps
- FTDI USB to RS232 FT232RL Converter
- ZT213LEEA Serial Driver
|
|
|
|
|
|
|